We use a ninja blender for crushing, grinding, chopping, and blending different types of food ingredients to make homemade smoothies, hot soups, hot sauce milkshakes, hummus, and more food recipes. And also, we use it for making baby food, various frozen drinks, juices, coffee drinks, strawberry Shakes, and more favorite and delicious food recipes.
But due to excessive or careless, or long-term use, all ninja blender blades can be dull or useless, even can be damaged. It is an ordinary fact. It is not only true for ninja blenders, but it is also true for NutriBullet blender, Hamilton Beach blender, Oster Blender, Blendtec blender, Cuisinart blender, KitchenAid blender, and all other blenders in the present market.
However, it is a matter of sorrow that most ninja blender user doesn’t know how to sharpen the blender blades? As a result, being frustrated, they quite often buy a new ninja blender or replace the blades instead of sharpening the blades. In this way, they spend their money, time, and effort unnecessarily.
As a ninja blender user, if you don’t know how to sharpen ninja blender blades, don’t worry. In this article, you will find seven unique and practical tips and tricks step by step about how to sharpen ninja blender blades? Here you will also find the best replacement parts for ninja blender.
So, continue your reading until the end if you want to discover 7 unique, simple, and perfect tips and tricks about sharping ninja blender blades. And find the best replacement parts for your ninja blender.
How to Sharpen Ninja Blender Blades?
I hope you already know a ninja blender has four blades that are made of stainless steel. Two edges are pointing upwards, and two are downwards.
As metal instruments can be easily sharpened, you can also sharpen your Ninja blades easily, quickly, and comfortably. Only you need to know the right approach and use of tools.
I mentioned some proper approaches and tools step by step below.
Equipment Needed:
- A towel
- A toothbrush
Step 1: Disconnect The Blander From The Electric Source
Remembering the word ‘safety first,’ your first important task is to disconnect the blender from the electricity. If you keep connecting the blender with electricity, you can fall into an accident during work.
To avoid any unexpected incident (electric shock), disconnect the blender from the electric source before starting work. Make sure your hand is completely dry while disconnecting the blender from the electric source.
Step 2: Remove The Jar From The Base
In this step, your most important task is removing the blender jar. With great care and slowly, separate the plastic or glass jar from the blender base. And then clean the jar and keep it in a safe place.
Note: It would be better if you can also clean the base like the jar. In this case, you can clean the base by wiping it thoroughly with a brush or damp towel.
But it is not compulsory cleaning the blender pitcher and base as you can clean them after sharpening the blades and before reassembling the blender’s all parts.
Step 3: Take Apart The Blades From The Base
IN this step, you have to apart the blades from the base. If you don’t know how to take apart ninja blender blade? Then try to apart the blades by following your ninja blender user manual.
If the blades are attached to the base, it would be difficult for you to sharpen the blades. So, you need to remove the blades entirely from the blender’s base. Then, you can sharpen the blades without any obstruction.
You see the base at the bottom of the blender. It is holding the blades of the blender with the jar. Now, wear protective gloves in your hands and hold the base with your left hand with great care and slowly. Then with your right hand, turn the blades counterclockwise and separate the blades one by one from the base.
In a word, separate the blades from the base according to your advantages. After separating the blades, put them alone on the table.
Step 4: Clean The Blades With Great Care
After taking apart the blades from the base, you have to clean your blender’s blades. For cleaning blades, take a toothbrush and soak it in some white vinegar or soapy water. Then with the brush dipped in white vinegar or soapy water, brush the blades until the blades become thoroughly clean.
If the blades are not clean in this way, you can also clean the blades with polident tablet mixed water. But in this process, you have to keep the blades in the mixture for more than 30 minutes.
Note: I have no specific recommendation about the way of cleaning the blades. You can clean the blades both ways. So try to clean the blades thoroughly according to your desired convenience.
Step 5: Sharpen The Blades Of Ninja Blender
It is the most main and important step of this article. In this step, your task is to sharpen the blades. All four blades need to be sharpened separately.
To sharpen the blades, take a blade in your left hand and a sharpening plate or rod in your right hand. Then run the sharpening plate or rod over the blade across the four sides of the blade.
After running the sharpening plate or rod over the four sides of the blade a few times, run your finger over the blade, and you will see that the blade has become sharpened.
After sharpening the first one, sharpen the other 3 blades in the same ways. Sharpen the dull blades until all the blades become are sharp thoroughly.
Important Note: Maintain a safe physical distance while sharpening the blades. And wear protective gloves on your hand until the task is complete, and try to sharpen the blades slowly. Don’t try to sharpen the blades in a hurry. Otherwise, your hand may be cut off with the blade.
After completing the sharpening, clean the blades again, following step four again. Then dry the blades wiping them with a towel or in the air.
Step 6: Check The Sharpness Of The Blades
If you can follow the above-descrived steps, your work is almost finished. In this step, make sure that the blades are sharp enough.
To test the sharpness of the blades, reassemble every part of your ninja blender and connect the blander with electricity. After then, put some things in the blender and check the sharpness of the blades.
If you saw the blades sharpened enough, it means all of your efforts became successes.
You May Also Like:
- The A – Z Of Ninja Supra Kitchen System Reviews
- How TO Clean Ninja Blender?
- Are Ninja Blenders Dishwasher Safe?
- How to Turn on Ninja Blender? Why Won’t IT Turn On?
Step 7: Final Thought
After reading the above tips and tricks, you may now know how to sharpen a ninja blender blade? However, if you want to find the best service from your ninja blender and its blades, you have to follow the ninja blender user manual and some extra tips and tricks.
Below I have given 10 important tips for you. By following these tips you can take care of your ninja blender and its blades perfectly. Also, these tips will help you use your blender safely and easily and find the best results from your blender.
10 Extra Important Tips About Caring Ninja Blender and Its Blades Perfectly!
- Try to follow the ninja blender user manual appropriately while assembling and disassembling the blades of the blender.
- Never try to sharpen ninja blender blades more than it needs to be.
- Never try to remove more metal because it not required.
- Occasionally, you should sharpen your blender’s blades to keep them okay and sharpened.
- For frequent use, your ninja blender blades can be dull, and then you should sharpen the edges instead of buying a new blender.
- Before reassembling the blades with the base, you should clean them again.
- For more protection, you should wear protective gloves. Because when you will sharpen the blades, unfortunately, the blades can slip from your finger and your finger can be cut with sharp blades.
- Always clean the blender before and after every use, and try to keep it and its all parts safe place.
- Never soak the motor base into the cool or warm water for cleaning. Always clean the motor base wiping with a paper towel.
- You can clean the blender blades in the dishwasher but it would be better if you can clean them in hand wash.
- Use your Ninja blender wrench during the assembling and disassembling the blades of the blender.
What Should You Do If Your Ninja Blender Blades Become Damaged Or Useless?
If your ninja blender blades or any other part become damaged or useless and requires replacing, you have nothing to be worried about. And need not throw the blender in the dustbin.
All models and series NInja blender replacement blades and all other replacement parts are available in the current market, especially in the online marketplaces. And they are very affordable in price.
By buying new parts and replacing them in your blender, you will be able to activate your blender again like new. For this task, you will not need to spend much money and give much effort.
Below I have enlisted different models and series ninja blender replacement parts list and their short reviews. Buy your desired replacement parts for ninja blender from the below’s ninja blender replacement parts list if your blender any part requires replacing.
Ninja Blender Replacement Blades And PartsList:
.
You May Also Like:
- Complete GuideLine About Vitamix Blade Sharpening!
- Ninja 1100 Replacement Parts Reviews
- Ninja Professional 1500 Replacement Parts Reviews
- Ten Best Substitute for Chipotle Powder
Final Verdict
Have you found a complete solution about how to sharpen ninja blender blades? If you found and feel this article is helpful for you, then share it with others so that they can be benefited.
And don’t be hesitated to leave a comment if you have any questions on your mind about Ninja Blender. I will promptly attempt to reply to your comment.
