Bosch Dishwasher Stops Mid Cycle-What to do?

Bosch dishwashers are some of the hardiest kitchen appliances around. The German brand blends modern technology with durability to give you the most reliable dishwasher. 

Like other home appliances, your Bosch dishwasher is vulnerable to troubleshooting and mechanical issues. For the dishwasher to serve you better, it is crucial to know what causes the mid-cycle stoppage. You also require to know in detail how to fix the issue. 

Our Bosch dishwasher guide is there to reveal to you the causes of this typical trouble and its fixes. This guide also shows you how to stop your dishwasher mid-cycle. Read on to solve a wrong reset.

Why Does My Dishwasher Keep Stopping Mid-Cycle?

Your Bosch dishwasher is stopping before a complete cycle because of a mechanical fault or reset issue. 

So, what are the mechanical issues that can cause your dishwasher to stop before your dishes are clean and well-rinsed?

1. Blown Thermal Fuse

A blown fuse can make your dishwasher stop prematurely. The appliance is electrical, meaning that it uses a fuse to control the electric current. 

Fuses protect electric equipment’s motor so that it does not overheat. An installed fuse on your dishwasher is thus a safety measure. 

When the thermal fuse is blown up, the dishwasher will not restart. One way to tell that the fuse is not in good condition is the indicator lights on the dishwasher’s front.  

If the lights are not illuminating, then the electric current is not flowing into your appliance. To solve the issue, bring in an expert to check the thermal fuse and the cause of the tripping. 

Most often, equipment thermal fuses do not blow. If the fuse is intact, the problem could be the circuit breaker fuse issue. This fuse is easy to replace and get things back to normal.

2. Control Panel

Your dishwasher comes with a control board, which is your appliance’s brain. The control panel’s design lasts a lifetime of the appliance. While your dishwasher’s control board is durable and long-lasting, anything can go wrong, including a self or wrong reset. 

When the control shuts up, there may be light indicators. Sometimes there may not. The best way is to read the display unit carefully if the LED display is showing. It could be a memory loss, a reset, or a wrong faulty setting that you keyed. 

Go ahead and reset the unit. If you cannot establish the problem, a Bosch dishwasher technician will come in handy to help you out.

3. Low Water Pressure

A dishwasher runs if there is enough water and pressure. Whenever there is low water pressure, that means that it isn’t sufficient to run your dishwasher. Your dishwasher appliance will eventually stop midway. 

When there is no water flowing into the dishwasher, the motor will produce an abnormally loud noise. To rule out the issue of insufficient water and low pressure, check from your faucet by turning on the water briefly. It could be a water outage, a leakage, or a loose water connection.

4. Faulty Motor And Pump

Your Bosch dishwasher stops mid-operation because the motor and pump stop may have developed a mechanical issue. The only way to rule out your appliance’s fault is through an inspection by an authorized Bosch technician. 

An expert will first check the control board, water pressure, and fuses before concluding that the motor and pump are faulty.

5. Door Latch

A Bosch dishwasher door latch comes with a microswitch that engages the appliance as a safety measure. If the door latch switch is faulty, the dishwasher will not function. 

The other reason why the washer stopped mid-operation could be a door latch that didn’t snap well. If the door’s microswitch is the problem, you may have to replace the entire latch. 

Other times it could be you have overloaded your dishwasher. Check out, remove some dishes, and try to activate the door switch manually.

6. Fan Assembly

The fan works by drying your utensils. You are sure that you activated the dry cycle, but the utensils are not dry. The reason is that the fan assembly is faulty. 

Also, your dishes are coming out quite wet because the fan cannot pump out hot and moist air after a complete wash cycle. Your dishes may be clean and well rinsed, but the chance is that your dishwasher completed the wash cycle but skipped the drying cycle.

7. Faulty Thermostat

What if the fan assembly is sound, but the washer is not drying the utensils? The other parts may not be functioning well, but one of the culprits could be the high-limit thermostat. This one is the security feature for guarding the heating element. A thermostat ensures that the element doesn’t get too hot.  

A slight malfunction of the thermostat will turn off the heating element prematurely. The result is cooler temperatures in the dishwasher that cannot dry the utensils. You will know that it’s a thermostat issue if the inside is abnormally cold. 

A multimeter will also give you an accurate temperature. Also, if the heating element is the problem, your dishes will not be thoroughly clean.

How Do You Reset A Bosch Dishwasher Mid-Cycle?

If you realize that your Bosch dishwasher is stopping mid-cycle because of a reset, you will have to fix the issue immediately to continue cleaning the batch that is inside. So, how do you reset your appliance mid-operation?

Firstly, you have to locate the reset switch. So, where is the reset switch on your Bosch dishwasher?

Bosch dishwashers have their control board on the door. It should not be challenging to locate the Reset switch. Some Bosch models have the Start switch labeled “Reset” or “Reset 3 Seconds”. The past models have the Cancel or Drain switch as the reset switch.

To begin using your dishwasher again, go ahead and press the Start switch. Hold for five moments to reset.  

Why Does My Dishwasher Shut Off After A Few Minutes?

Your dishwasher shuts off immediately after a few minutes because of a mechanical malfunction, power outage, low pressure, or insufficient water. The shut-off mid-cycle could also be because of a faulty control board and a wrong reset. The wisest step is to stop the dishwasher and find out the cause.

How Do You Stop A Bosch Dishwasher Mid-Cycle?

There are many reasons why you will need to stop your Bosch dishwasher mid-cycle. It could be because you noticed a malfunction, insufficient water, or a wrong reset that requires attention. 

You may find it quite challenging to stop the running cycle in a dishwasher. That’s because canceling the cycle means opening the door to access the controls. This process can lead to scalds from the hot water as you reach the control board. 

Fortunately, there is a straightforward and safe guide to ensure that you stop the appliance safely.

Step One

  • The first step is to cancel the current cycle. Open the door at an angle to access the control board.

Hint! Please do not open the door at a more significant angle as it will allow the hot water to splash out and scald you.

Step two

  • Press on the “Start/Reset” switch and hold to activate the indicator light off.

Step three

  • When the light is off, release the switch and close the door. Allow your dishwasher about one minute to finish draining.

Step Four

  • Your dishwasher beeps when the draining is complete. Open the door and depress the “On/Off” switch. That will end your cycle. You can go ahead and select a new one.

How Do You Fix A Dishwasher That Stops Mid-Cycle?

Your dishwasher stopping halfway is a common troubleshooting issue with all appliances. You have no reason to give up as there are simple fixes that you can perform to get your washer up and running. How to fix the issue will depend on a proper diagnosis and the primary cause of the problem.

As you Do It Yourself, we recommend that you attempt the fixes without interfering with the warranty. Read and internalize the user’s manual to make sure that you converse well with the troubleshooting tips. Anything that seems complicated to you will require an authorized technician to sort.

Below are some of the DIY fixes that you can try;

  1. Check Out The Water Pressure

Earlier, we examined one of the causes of your dishwasher stopping the mid-cycle is low pressure. Your washer will stop if there is a slight drop in water pressure. The cause of low pressure could be a water leakage or outage. Check out these and solve the water issues first before you conclude it is a faulty appliance.

2. Rectify The Wrong Reset

Your Bosch dishwasher may have stopped before completing the cycle due to a wrong reset on the control board. To sort out this issue, you will have to stop and restart the appliance.


  • Open the door and press the start/Restart switch on the control board.
  • Hold the switch until the lights go off. 
  • Release the switch, close the door and wait for the dishwasher to drain well. Your appliance will signal you with a beep once it completes draining the water. 
  • Open the door and press the on/off switch. That will end the wrong cycle and allow you to restart.

3. Inspect The Door Latch

You may have missed snapping your dishwasher’s door perfectly in place. The faulty door latch’s microswitch could also be the reason why your dishwasher is stopping half cycle. Carefully inspect the door latch for any faults before proceeding with other fixes.

Try to close it again and see if the appliance will start working. If not, the door latch unit may require a new replacement by a Bosch technician. You can also choose to fix it yourself if it is an easy one.

4. Test The Thermostat And The Fuse

If you have got a multimeter around, that can be a savior to test a faulty thermostat. The tiny gadget will give you a hint if your appliance’s thermostat and the fuses are working or not. From there, you will consult an expert to help repair or replace the unit.

5. Check Out The Fuse Box

A power outage can lead to machines stopping midway, especially if there is no power back up. The primary place to check that is your fuse box. You can check out whether other electric gadgets like the washing machine, cooker, TVs, and stereos are working. Use a multimeter to find out if all the fuses are functioning perfectly.

If the gadgets are also off, then the problem is universal and comes from a power outage. Be patient for power to come back. Investing in a generator can help ease the trouble of your equipment stopping mid-cycle.

Read more

Bottom Line

There are many causes of a dishwasher failure, especially stopping mid-cycle. Mostly, the failure could be due to mechanical fault, a wrong reset, power, or water outage. The problem could also be a result of low water pressure.

Finding out the root cause of the problem will save you time and make an informed decision. You can opt to sort the issue using DIY tips or call an expert.

The extent of the malfunction will rule the route that you will take. Sort out the issue to enjoy your dishwashing experience.

Leave a Comment