Can You Wash The NutriBullet Blades?

The blade is a part and parcel part of a blender. It plays an important role in the performance of the blender. The more the blade becomes active, sharp, and durable, the performance of the blender will become greater.

To find the best results from the blender, the blade requires cleaning after every use and sometimes requires sharpening and replacement. If the blade is not cleaned after each use or occasionally sharpened or replaced, the blade will be dull and inactive. And then the blender’s performance will be unsatisfying.

NutriBullet blender has two types of blades (cross blades and blending blades or extractor blades). The blades are made of stainless steel, very durable, sharp, and any kind of liquids and dishwasher-safe.

NutriBullet blender blades can be easily washed. You can wash a NutriBullet blade both in handwash or using a dishwasher. However, handwashing is the best way to thoroughly clean a NutriBullet blender blade. 

To wash your NutriBullet blade by hand:

  • Wear dishwashing gloves on your hand
  • Take the blade unit on hand and rinse it with warm, soapy water.
  • Now take a dish brush and brush the whole blade unite with the dish brush until all food debris removes from the blades.
  • Now rinse the blade unit with cold water/hot water. Then allow it to dry, keeping it in a safe place.

How To Deep Clean NutriBullet Blade?

Deep cleaning is the best way to clean your NutriBullet blade well. It is very effortless. To deep clean your NutriBullet blade, follow the following simple steps. 

Requirement Ingredients:

  • A dish-cleaning brush
  • Dish soap/10 percent dilute vinegar or lemon juice.
  • A fresh cool water
  • Warm water
  • Dishwashing gloves

Steps:

  1. Unplug the blender from the power source.
  2.  Take apart the blade assembly from the container.
  3. Wear dishwashing gloves on your hand.
  4. Take the blade assembly in your hand and carefully rinse it with cool water.
  5. Now let the blade soak for 20 minutes in cool water.
  6. After then, take the dishwashing brush in hand and add a few drops of dish soap/10 percent dilute vinegar or lemon juice to the brush. 
  7. Now, brush well the whole blade assembly with the brush until all the food particles are removed from the blades.
  8. Then rinse the blade assembly with warm water. Continue this process one more if required.

Can You Wash NutriBullet Blades In Dishwasher?

Yes, you can wash NutriBullet blades in the dishwasher.

A NutriBullet blender has four blades in a blade assembly. Each of the blades is made with stainless steel material. The blades are very sharp, durable, and dishwasher safe (top rack), so you can wash your NutriBullet blender blades in the dishwasher without any problem.

Can You Put A NutriBullet Blade In The Dishwasher?

Yes, you can put a NutriBullet blender in the dishwasher because the NutriBulle blade is dishwasher safe.

NutriBullet has two types of blades, and they are the cross blade and the blending blade or extractor blade. Each type of blade is dishwasher-safe. So, you can put a NutriBullet blade in the dishwasher to clean.

Can You Replace NutriBullet Blades?

Yes, you can replace NutriBullet Blades.

The NutriBullet blades and other parts are available in the present markets and the on NutriBullet website. If your NutriBullet blender blades require replacing, do not worry. You can replace your blender blades by buying new blades from the present market or the NutriBullet website.

How Often Should You Replace NutriBullet Blade?

You should replace the NutriBullet blender blade every 6 months.

NutriBullet blender blade comes with stainless steel blades attachment. The blades are made of stainless steel material, and they are very durable and sharp. The blender blades work great for at least 6 months after starting to use the blender.

According to the NutriBullet instruction manual, the NutriBullet blade should replace every 6 months. So, if you want to find the best results from your NutriBullet blender, you should change your blender blades every 6 months. NutriBullet blender replacement blades and other parts and accessories are available on the NutriBullet website and other online marketplaces. 

Do You Need To Sharpen NutriBullet Blades?

Due to long-term use or excessive use, the NutriBullet blade can be dulled and requires sharpening. You can sharpen the NutriBullet blade using the knife sharpening stone. Visit to learn: How to sharpen blender blade?

Can You Remove The Blade From NutriBullet?

Yes, you can remove the blade from NutriBullet.

NutriBullet blender comes with two types of blade attachments, and they are the cross blade and the blending blade (extractor blade). You can remove each type of blade from the NutriBullet blender. You just have to know the right process for removing the blade.

How Do You Take Apart A NutriBullet Blade?

For cleaning, sharpening, or replacing the blade, you may require taking apart the blade from the NutriBullet. And it is very easy to take apart a NutriBullet blade. To take apart a NutriBullet blade, watch the following Video.

Watch this Video Link:

Which NutriBullet Blender Parts Are Dishwasher Safe?

NutriBullet blender parts are blending cups, lids, blades, lip rings, motor base, rubber gasket, straw power cord, and more (depending on model and series). Each of these NutriBullet blender parts is not dishwasher safe.

Only the blending cups, lids, blades, lip rings, rubber seals, and straws of a NutriBullet blender are dishwasher safe. So, you can clean these NutriBullet blender parts in the dishwasher without any hesitation. For cleaning other NutriBullet blender parts, you have to use a damp dishwashing rag/dry dishcloth.

Can NutriBullet Base Go In Dishwasher?

No, the NutriBullet power base cannot go in the dishwasher because the NutriBullet blender power base is an electric component and has a motor inside it.

The motor is not water or any other liquid-safe, so you should not soak the NutriBullet power base in water or any other liquid to clean. Also, the NutriBullet power base is not dishwasher safe, so you should not place it in the dishwasher to clean.

If you want to clean your NutriBullet power base, just wipe it inside and outside with a damp rag. And store the power base in a safe and dry place after cleaning it.

Can You Wash NutriBullet Machine?

No, you should not wash a NutriBullet machine.

A NutriBullet machine is an electric component, and it has a motor inside it. And the motor of the NutriBullet blender is not water or any other liquid safe.

If you wash your NutriBullet machine using any kind of liquid or placing it in the dishwasher, it will damage your blender machine, and your blender will not work again.

How Do You Deep Clean A NutriBullet Base?

Deep cleaning a NutriBullet base is very easy. To your NutriBullet motor base, follow the following steps:

  1. Unplug the blender from the power source.
  2. Take apart the motor base from the blender by following the manufacturer’s instructions.
  3. Take a rag and soak it in warm water. Then wring the rag thoroughly.
  4. Now wipe the motor base inside and outside thoroughly with the damp rag until removing all the food debris from the motor base.
  5. Now dry the motor base using a dry cloth rag or keep it under a running fan.

Note: Before using the motor base again, it is fully dry. Never soak the motor base in water or any other liquids because the motor base is not liquid-safe, and the liquid (especially water) will damage the motor base. Also, never put the motor base in the dishwasher to clean because it is also not dishwasher safe.  Clean the power base at least once a week or whenever food spills onto the power base.

Can You Put Hot Liquid In A NutriBullet? /Why Can’t You Put Hot Liquid In A NutriBullet?

No, you should not put hot liquid in a NutriBullet blender.

Don’t try to put hot liquid in a NutriBullet because the hot liquid will create internal pressure inside the blender, and that will damage your blender.

Can You Put Ice In A NutriBullet Rx?

Yes, you can put ice in a NutriBullet RX blender.

Though the NutriBullet RX blender is not a high-powered blender, you can put ice in it. In that case, you have to add a bit of liquid substance (cool) to the ice cubes. Then you will find the best satisfying results of putting ice in it.

Can NutriBullet Be Repaired/Can NutriBullet RX Be Repaired?

Can NutriBullet RX Be Repaired? It is a frequently asked question and a very important question. This question’s answer should know to all Nutribullet users.

Due to long-term use or careless use, all models and series NutriBullet blenders can be damaged and may require repairing or replacing parts.

If you are a NutriBullet RX blender user and your NutriBullet Rx requires repairing, don’t worry. You can repair it easily.

Not only NutriBullet Rx but also all other models and series’ NutriBullet blenders can be repaired easily. And the user does not require facing any problems repairing their blender.

To repair your NutriBullet Rx blender, you just need to contract with the NutriBullet customer service team. The NutriBullet customer service team is ready 24 hours to give the service to their customers. Within a short time, they will repair your NutriBullet blender perfectly with great care.

You can repair your blender free of charge if your blender warranty remains. Otherwise, you have to spend some money to repair your blender. Maybe now you are thinking about how you can contract with the customer service team.

Don’t worry. Go to the NutriBullet Website. There you will easily find the customer service team’s contract number. After seeing their contract number, call them and give your NutriBullet Rx or more to repair.

At A Glance! Top 3 Best NutriBullet Blender

You May Also Like:

Leave a Comment