Why Does My KitchenAid Mixer Not Reach Bottom of Bowl?

Are you one of the people who trust your KitchenAid mixer, and it becomes the first thing to reach when it is time to whip up homemade cookies? Once you pour all your ingredients and turn on the mixer, it seems not to be working. Do not be discouraged; there is a solution.

The beater is the problem when your KitchenAid Mixer is not reaching the bottom of the bowl. The beater can be too high or too low. Please don’t be upset about it. Just be sure about the problem because the mixer comes at the perfect beater height from the factory.

How To Fix The Beater Problem (Step By Step):

The beater may not reach the sides or bottom of the mixing bowl. For this, the KitchenAid Mixture cannot reach the bottom of the bowl. You can align and fix the beater easily. Let us check out how this is possible.

Step one

Disconnect the Kitchen Aid mixer from the power source to allow you to check and work on the appliance to ensure you are safe from harm and danger.

Step Two

Set the bowl lift handle to the down position to enable you to see the adjustment screw that is on the lower side of the stand.

Step Three

Using a flat screwdriver, turn the screw slightly to the right to lower the beater or to the left to raise the beater.

Step Four

Do an easy dime test to see if your beater is in the right position for optimum performance. Below are the guidelines on how to do the dime test:

  • Put the dime at the bottom of your bowl.
  • Turn the mixer onto the stirring or low speed.
  • Watch the dime how it moves around the bowl. If the dime does not move in the bowl at all, think the beater is too high. If the dime moves around constantly, your beater is too low.
  • Use a flat head screwdriver to fix the height of the beater accordingly.

Why Does My KitchenAid Mixer Bowl Comes Loose

It is annoying when the mixer bowl comes loose. The Kitchen Aid mixer will not work properly as the bowl will begin shaking whenever you turn on the mixer. Amazingly, once you know the causes, you have a way to fix the problem.

Check out!

  1. Confirm or check to snap: Ensure that you snap the bowl firmly at the back. Apply pressure on the bowl by placing your hands as you insert or place the bowl on the arm.

You can also push down the bowl at the back until you hear the bowl snapping down. When you snap fully, you will not lose the bowl anymore.

  • Quantity of the dough:  Ensure that dough ingredients are proportional to the bowl’s capacity. Too much dough raises the bowl, thus not enough space for mixing the ingredients properly.

Always consider the bowl markings not to exceed them while adding the dough. Filling to the brim can cause the bowl to be loose.

  • Check the speed you are using for the mixer: High speed exerts a force that will lead to the unlocking of bumps, and the mixer bowl will come out.

Avoid excessive pressure on the bottom of the bowl by controlling speed to prevent the bowl from coming out, thus making it lose.

  • The perfect height of the beater: Ensure that you set the beater correctly, according to what you want to do. When the beater adjustment is too low, pressure on the bowl leads it to unlock and becomes loose. The dime test will guide on the correct height of the beater.
  • Bowl’s bottom worn out:  The bowl of a mixer can wear out if the appliance has been in use for a while. The bowl creates friction between the surfaces, so with time, the bottom of the bowl wears out. Consider bowl replacement as the worn-out one cannot function properly.

Final Thought

For your KitchenAid mixer to function properly and last longer, always check on the beater by following the above steps.

Keep the mixer bowl intact by ensuring capacity is proportional to the number of ingredients for a particular food. For worn-out parts, always consider replacement to work effectively.